Capabilities
Tremendous In-House Capabilities
Jarrett Welding & Machine, Inc. has steadily grown its machining department into a regional powerhouse of hardworking machines. While the machines are the tool, it is the men and women behind them that create outstanding value for our customers.
HAAS VF12 Vertical Machining Center
Our Haas VF‑12 is a rugged, large‑capacity 3‑axis CNC vertical machining center featuring a 150″ × 32″ × 30″ working envelope, and a high‑power spindle (up to 10,000 rpm on the 40‑taper/30 hp model).
X Axis Travel: 150″
Y Axis Travel: 32″
Z Axis Travel: 30″
Rapid Rate X Axis: 360 IPM
Rapid Rate Y Axis: 600 IPM
Rapid Rate Z Axis: 600 IPM
Max Table Load: 4,000 LBS
Spindle Motor: 30 HP
Spindle Speed: 8,100 RPM
Spindle Taper: 40
Tool Changer: 30 ATC
Max Cutting: 360 ipm
Max Torque: 90 ft-lbf
Max Thrust X: 3400 lbf
Max Thrust Y: 3400 lbf
Max Thrust Z: 5600 lbf
Max Tool Length: 16″
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 2.8 s
Chip-to-Chip (avg): 3.6 s
Dimensions:
Weight: 37,200 LBS
Romi M20 20"x80" Flat Bed CNC Lathe
Our Romi M20 Lathe provides 83″ of travel with zero taper. This is a fantastic in-house capability.
Swing over bed: 20″
Swing over cross slide: 10″
Swing over carriage: 17.7″
Distance between centers: 80″
Cross slide travel (x-axis): 11.02″
Longitudinal travel (z – axis): 80″
Bed width: 13.39″
Hole through spindle: 3.15″
Range of spindle speeds (inf variable): 2–2,200 RPM
Rapid traverse z: 394 IPM
Rapid traverse x: 295 IPM
Tailstock quick travel: 5.12″
Quill diameter: 3.15″
Quill taper hole: 4MT
Motor: 15 HP
Weight (approx.): 10,000 Lbs
Dims (lxwxh): 156” X 60” X 80”
Tank (lxwxh): 100” X 40” X 22”
Haas VF7
A true workhorse of our fabrication shop, the Haas VF7 provides affordable capability for Jarrett clients.
Spindle
Max Rating 30.0 hp
Max Speed 8100 rpm
Max Torque 90.0 ft-lbf @ 2000 rpm
Max Torque w/opt Gearbox 250 ft-lbf @ 450 rpm
Drive System Inline Direct-Drive
Taper CT40 | BT40 | HSK-A63
Bearing Lubrication Air / Oil Injection
Cooling Liquid Cooled
Travels
X Axis 84.00 in
Y Axis 32.00 in
Z Axis 30.00 in
Spindle Nose to Table (~ max) 34.0 in
Spindle Nose to Table (~ min) 4.0 in
Prototrak TRAK K4
Our TRAK K4 is still used for those jobs that are just out of reach for our out CNC machines. It is timeless.
Number of Axis 3
Table Size 10″ x 50″
Longitudinal Table Travel 32″
Cross Saddle Travel 16.5″
Vertical Knee Travel 16.5″
Power 5hp
Spindle Speeds (Variable) 70- 3,950 RPM
Spindle Nose #40
Spindle Quill Travel 5″
Spindle Quill Feeds 0.003″- 0.006″- 0.0015″
Head Tilt +- 90°
Feed Rate 1- 100 IPM
Max. Workpiece Wt. 850 lbs.
Rapid Traverse Rate 100 IPM
Ram Travel 24″
Coolant Capacity 9 gal.
CNC Control – Proto Trak SM
Dimensions (L x W x H) 71″ x 59″ x 92″
Weight 3630 lbs.
Haas VF-2SSYT
The Haas high-performance Super-Speed vertical machining center provides Jarrett high-volume production and reduced cycle times.
Spindle
Max Rating 30.0 hp
Max Speed 12000 rpm
Max Torque 90.0 ft-lbf @ 2000 rpm
Drive System Inline Direct-Drive
Taper CT40 | BT40 | HSK-A63
Bearing Lubrication Air / Oil Injection
Cooling Liquid Cooled
Travels
X Axis 30.00 in
Y Axis 20.00 in
Z Axis 20.00 in
Spindle Nose to Table (~ max) 24.0 in
Spindle Nose to Table (~ min) 4.0 in
Haas TL-25 Lathe
Our TL-25 has includes live tooling and a subspindle to work the backside of parts in one setup. It is great production unit.
Full C Axis
Swing over bed: 20″
Swing over cross slide: 10″
Swing over carriage: 17.7″
Distance between centers: 30″
Cross slide travel (x-axis): 11.02″
Longitudinal travel (z – axis): 30″
Bed width: 13.39″
Hole through spindle: 3.15″
Range of spindle speeds (inf variable): 2–4,000 RPM
Rapid traverse z: 394 IPM
Rapid traverse x: 295 IPM
Tailstock quick travel: 5.12″
Quill diameter: 3.15″
Quill taper hole: 4MT
Motor: 15 HP
Weight (approx.): 10,000 Lbs
Dims (lxwxh): 156” X 60” X 80”
Tank (lxwxh): 100” X 40” X 22”
Haas ST-20 Lathe
Our Hass ST-20 Lathe features live tooling, a 2.5″ Bar capacity, 13″ cutting diameter over 21″ of travel, and a 20 hp motor. It is a beast.
Full C Axis
Chuck Size 8.3 in
Max Part Swing 21.0 in
Max Cutting Diameter (with BOT turret) 13.00 in
Max Cutting Diameter (with BMT65 turret) 11.75 in
Max Cutting Diameter (with VDI turret) 11.80 in
Max Cutting Length (varies with workholding) 22.5 in 572 mm
Bar Capacity 2.50 in 64 mm
X Axis 8.40 in 213 mm
Z Axis 22.50
Spindle Nose A2-5
Max Speed 6000 rpm
Max Sync Speed w/Main Spindle 4800 rpm
Chuck Throat Ø 1.30 in x 1.37 in DEEP
Drawbar Bore (NON-THROUGH) Ø 1.00 in x 4.50 in DEEP
Spindle Bore (without chuck and drawbar installed) 1.50 in 38.1 mm
Integrated Brake Torque 17 ft-lbf 23 N/m
Spindle Orientation Accuracy (Requires SO) ± 0.02°
Rapids (B-axis) 400 ipm 10 m/min